Some of the commands are not working after adding my device

If only some buttons do not work, there are two possible causes and the solutions are as follows:

1. The button on X1-Remote doesn’t have a command assigned to it or the assigned command is incorrect.

For instance,  the default assigned command may be “Exit,” “Back,” or “Return.” In case there are two similar commands in the code library, it is possible that the default command is not the one you need. You can reassign the command to the button by going to Device–>> Edit and selecting Assign commands for Remote keys.

In addition, the X1 remote control has two-in-one buttons for play/pause or mute/unmute functions. However, if the original remote control has separate commands, X1 may not have these functions assigned by default. For instance, if you want to assign the command “Play” to the play/pause button, you can do so, but you’ll need to select another free button to assign the “Pause” command.

2. The command is incorrect.

There are three suggestions for you in this situation:

a.Correct it by command repeats.

b.Learning from the original remote.

c.Filter and test similar commands from cloud data.

If it’s still not working, please get in touch with the CS team via email at service@sofabaton.com or send feedback from the Sofabaton app.