Specifications
Bubbles on the U3 remote screen are usually caused by a second protective film that is still attached. Manufacturers add this film to protect the display, and you should remove it before use. How to fix: Note: There is a second...
If your U3 remote becomes unresponsive, freezes on a blue/white screen, or encounters any other system glitch, you can perform a forced hard reboot by pressing the physical button on the remote. Follow these steps: Locate the Air Mouse (cursor)...
No, the U3 does not have a “Find My Remote” feature. The reason is that the feature relies on a Bluetooth connection between the remote and the phone app. Because phone operating systems often terminate background Bluetooth connections to save...
Follow these steps: Plug your R1 into a power source. Open the Sofabaton App on your phone and pair with U3. In the App, tap “Me” at the bottom‑right corner, then select “Remote Settings”, and choose “Pair with a New...
On the home screen, you’ll see a device list. The cursor usually stays on that list (e.g., on the first device, as in Figure 1), and the Settings icon at the top‑left is hollow. Scroll upwards with the wheel until...
Normally, your U2 remote’s display will automatically turn off after your preset sleep time. However, when connected to the SofaBaton app, this auto-off feature is temporarily disabled to maintain control functionality. To allow the display to turn off: 1. Open the SofaBaton...
The U2 remote uses 2 AA alkaline batteries. For optimal performance, we do not recommend rechargeable batteries.
...Earlier models U1 and U2 support only IR and Bluetooth connections. The latest U3 model, however, adds RF learning capability and operates on 433MHz and 315MHz frequencies (while still supporting IR and Bluetooth as well).
...The U2 remote supports control of up to 15 total devices with the following specifications: Note: For devices supporting both IR and Bluetooth, we recommend using infrared mode for more stable multi-device control.
...